Part Number Hot Search : 
PD30KN8 LEADFREE 2SA812 OPI1000L MPX12GSX PKG00 Z27VC OH10011
Product Description
Full Text Search
 

To Download ITRAX03 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 smart
positioning
ITRAX03 Key Features: * Tiny PCB form factor - 23mm x 23mm x 2.7mm * Ultra-low power consumption - <95mW @ 2.7V * Very High Sensitivity -152dBm (Tracking) * Basic A-GPS support * iTALK and NMEA0183 protocols * Kalman Navigation
ITRAX03
OEM GPS Receiver Module
* Very High Sensitivity * Ultra Low Power Consumption * Market Leading Programmability
Fastrax ITRAX03 OEM GPS receiver modules enable the implementation of full-fledged positioning features into appliances faster and with less effort than ever before. Offering industry-leading benefits in performance, size, power consumption, programmability and total cost of product, the ITRAX03 receivers are ideally suited for both industrial tracking and navigation systems and batteryoperated consumer products like sports accessories, handheld computers, asset tracking devices, vehicle navigation devices and mobile phones.
* Supports remote software updates * Extensive support for external sensors * Versatile interface ports * Accurate 1PPS timing output * ITRAX03/16 - 16MBit Flash Memory iSUITE03 SDK Software Development Kits Datalogger, up to 70.000 datapoints * ITRAX03/8 - 8MBit Flash Memory NMEA Engine
dedicated hardware search engine ensures fast TTFF thus no back-up battery is required. These benefits can easily be converted to smaller component costs and smaller design - crucial parameters for many projects.
ITRAX03/16 - Versatile Programmability
The ITRAX03/16 features 16 MBit Flash memory which allows versatile programmability with iSuite03 SDK. It also allows permanent operation parameter changes via NMEA or iTalk and data logging as a standard feature. Application costs are reduced significantly when no external processor is required and the ITRAX03 is used as a host controller. With fewer components, cost and application size are reduced.
Market Leading System Performance
Ultra-low, user configurable power management makes ITRAX03 one of the lowest power consuming, complete 12channel OEM GPS receivers on the market. Nevertheless, there are no compromises in performance. The ITRAX03 receivers have a navigation sensitivity as low as -152dBm making them applicable even for extremely demanding applications and environments. The ITRAX03 includes a fullfledged MMC-card interface which enables integrated PDA applications i.e. maps for navigation. A-GPS can be used to further improve TTFF and acquisition sensitivity.
ITRAX03/8 - cost efficient performance
In applications where the industry standard NMEA0183 protocol is sufficient and programmability is unnecessary, the ITRAX03/8 with 8MBit Flash memory, is a cost efficient and high performance alternative.
Quick Start with Easy-To-Deploy Solution
The addition of an antenna and power supply is all that is required to make the ITRAX03 operational. The Fastrax Engineering Services team can provide antenna design application notes to aid in further refinement of the antenna design for specific applications.
Cutting component costs
Space and costs are reduced due to the cutting-edge technology architecture in the ITRAX03 receivers. The surface mount SMD design eliminates need for expensive and labour intensive system and RF connectors. Very few additional components are required. Utilizing the ITRAX03 programmability cost of a host CPU can be saved. The
ITRAX03
OEM GPS Receiver Module
Specifications
General: L1 frequency, C/A code (SPS) 12 independent tracking channels Separate search & acquisition engine Update rate: Accuracy: 1 fix/s or user configurable Position: Velocity: Time: Reacquisition: TTFF: 3m (CEP), 6m 2DRMS 0.2 m/s (50%) 20ns RMS (static mode) I/O Ports: Dual Asynchronous data ports 22-pin GPIO (Shared Functionality) 2 x SPI-Interface Dual Pulse Measurement inputs 1PPS Output 2 x PulseMeasurement Timers 2 x Capture Timers 2 x Clock inputs MMC (Master) connection Protocol: NMEA-0183 V3.0 Proprietary iTALK binary protocol Processor: Proprietary, 32MIPS integrated 16/32-bit DSP-core RISC-like programming under Pre-emptive Real Time Operating System Control (VSDSP RTOS) Flash Memory: ITRAX03/16: ITRAX03/8: Dimensions: Weight: Connection to: Software Features: 16MBits Flash 8MBits Flash
100ms typical (signal reacquisition) Out of the box start: 40 s typical Cold Start: Hot Start: Quick Start: 35 s 8s 3s 4G 4 m/s3
Dynamics:
Acceleration: Jerk:
Sensitivity: Operating Voltage: Operating Temp: Antenna Supply: Antenna: Power Drain:
-152dBm (tracking) 2.7V...3.3V (linearly regulated) -40C...+85C Same as board supply External, passive or active 95mW @ 2.7V (Continuous Mode) 20mW @ 2.7V (Idle Mode) 60W @ 2.7V (Sleep Mode) (Active antenna power not included)
23 mm x 23 mm x 2.7 mm (Including RF shield) 3g 37 SMD connection pods under the module Kalman Navigation Reprogramming on the fly DGPS Supporting RTCM Standard Advanced Multipath Mitigation Advanced Cross Correlation Mitigation A-GPS Support WAAS / EGNOS Support
Other Fastrax GPS products
The ITRAX03 Family includes iFix03 OEM GPS Measurement Front
iFix03
End, iSuite03 Standard SDK, iSuite03 Professional SDK, ITRAX03 Evaluation Kit and ITRAX03 Development Board. The ITRAX03 Evaluation
kit includes an universal power supply, two serial cables, an active antenna, a user's manual and a CD with documentation and the GPS WorkBench PC software. The ITRAX03 Development Board allows
ITRAX03 Evaluation Kit
customers to develop custom demanding applications utilizing the versatile programmability and extensive connections available on the ITRAX03 products.
iTrax02 family of products includes iTrax02/4, iTrax04/8, iTrax02 uTracker02, uPatch02 and iTrax02 Evaluation Kit.
For programming the ITRAX03/16 Fastrax offers iSuite03 Standard SDK (software development kit). In addition to the software the iSuite03 Standard SDK includes three days of hands on training and e-mail support during
iSuite03 Standard SDK
development. The iSuite03 Professional SDK gives programmers access to
Adeline Oy 8/2003
extensive source code libraries enabling development of application using
iSuite03 Professional SDK
A-GPS, WAAS / EGNOS, RTK, external sensors, MMC interface, LCD drivers and other communication drivers in addition to Production Support Toolkit.
Separate product descriptions can be found at www.fastrax.fi
Fastrax Ltd * Valimotie 7 * FIN-01510 Vantaa * FINLAND


▲Up To Search▲   

 
Price & Availability of ITRAX03

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X